Operational Principles and Combustion Performance of a Simple Single-Chamber Incinerator for Dry Household Waste
DOI:
https://doi.org/10.68728/jrlk.v1i2.8Keywords:
Combustion efficiency, Dry household waste, Airflow, Single-chamber incinerator, TemperatureAbstract
Inadequate household waste management and limited landfill capacity require simple technologies that can reduce waste effectively. This study aimed to explain the operating principles of a simple single-chamber incinerator for dry household waste and evaluate its combustion performance. We used a quantitative experimental approach with dry leaves, plastics, wood, and other dry household waste. We tested the incinerator with and without a blower. Thermocouples measured combustion-chamber and external-wall temperatures, while direct observation and documentation recorded airflow velocity, waste mass, residual ash, combustion time, and efficiency. The results showed that blower-assisted operation increased the maximum chamber temperature from 615 °C to 840 °C, representing a 36.59% improvement. The average chamber temperature increased from 250.86 °C to 332.58 °C, while the maximum wall temperature rose from 235 °C to 450 °C. Increasing airflow velocity from 36 to 40 m/s reduced residual ash from 6.46 to 5.50 kg and improved combustion efficiency from 50.31% to 57.69%. These findings indicate that increased oxygen supply improves air–fuel mixing, stabilises combustion, raises chamber temperature, and promotes more effective waste conversion. Waste moisture and combustible content also affected heating behaviour; therefore, sorting and drying are important before treatment. The incinerator performed effectively for dry household waste, particularly with blower assistance. Further evaluation of flue-gas emissions and ash quality is required to confirm its environmental suitability.