Design and Performance Evaluation of an Integrated Double-Drum Grating and Screw-Press Machine for Sago Starch Extraction

Authors

  • Ramlan Department of Mechanical Engineering, Universitas Abulyatama Aceh, Aceh Besar, 23372, Indonesia Author
  • Iqbal Author
  • Muhammad Faisal Author
  • Mahyuddin Author
  • Muhtadin Author

DOI:

https://doi.org/10.68728/jrlk.v1i2.6

Keywords:

Sago starch extraction, Double-drum grater, Screw press, Integrated processing machine, Performance evaluation

Abstract

Sago starch processing at the small- and medium-enterprise level commonly relies on separate grating and pressing operations, resulting in longer processing times, greater labour requirements, and inefficient material handling. This study aimed to design, fabricate, and evaluate an integrated machine combining a double-drum grating unit with a screw-press mechanism for sago starch extraction. The study used a research-and-development approach, including problem identification, literature review, engineering design, material and component selection, fabrication, assembly, operational testing, and performance evaluation. The machine was powered by a 6.5-hp gasoline engine and included a frame, hopper, double-grating drums, transmission system, gearbox, and screw-press cylinder. Performance tests showed that the double-drum grater achieved an average processing capacity of 77.98 kg/h at 2,400 rpm, with an average grating efficiency of 90%. The screw press operated at 19.44 rpm and had a calculated theoretical capacity of 0.623 L/min, equivalent to 37.38 L/h. These results indicate that the double-drum configuration provided stable and effective size reduction, while the progressively reduced screw pitch generated continuous compression to facilitate starch separation from the fibrous residue. Integrating both mechanisms reduced intermediate material transfer and simplified the processing sequence. In conclusion, the developed machine offers a compact, practical, and efficient solution for sago starch processing and is potentially suitable for small- and medium-scale applications.

Downloads

Published

15-09-2026

Issue

Section

Articles

How to Cite

[1]
“Design and Performance Evaluation of an Integrated Double-Drum Grating and Screw-Press Machine for Sago Starch Extraction”, JRLK, vol. 1, no. 2, pp. 60–71, Sep. 2026, doi: 10.68728/jrlk.v1i2.6.

Most read articles by the same author(s)

1 2 > >> 

Similar Articles

1-10 of 15

You may also start an advanced similarity search for this article.