Design and Testing of a Simple Used Cooking Oil Stove for Community Use
DOI:
https://doi.org/10.68728/jrlk.v1i2.20Keywords:
Used cooking oil, Alternative fuel, Cooking stove, Stove design, Combustion performanceAbstract
Households and food businesses often discard used cooking oil, even though it has potential as an alternative cooking fuel. This study aimed to design, construct, and evaluate a simple used-cooking-oil-fueled stove for potential community use. We used a design-and-build approach, covering component design, fabrication, assembly, and performance testing. The stove comprised a fuel tank, fuel pipe, combustion chamber, nozzle, blower, fuel control valve, frame, and cooking utensil support. We tested three nozzle shapes using 20 mL of used cooking oil. We observed combustion temperature, heating time, burn duration, and flame stability. The stove operated on waste oil, while the blower produced a steadier flame and reduced visible smoke. The flat nozzle produced the highest reported temperature, reaching 574°C after five minutes. The round nozzle heated fastest, reaching 555°C after four minutes and 36 seconds. The conical nozzle sustained combustion longest, for six minutes and 35 seconds, with a maximum temperature of 503°C. These results indicate that nozzle geometry affects heating rate, peak temperature, and combustion duration. The device therefore shows potential to convert used cooking oil into useful cooking energy and reduce improper disposal of household waste oil. However, further evaluation is needed to assess performance under routine cooking conditions, user safety, and suitability for community use before wider implementation.